Mechanical Engineering M.S.M.E. (Non-Thesis)

Admission Requirements

Regular

  1. Completed requirements for the bachelor’s degree or the equivalent in the proposed or closely related field of study in Mechanical Engineering.
  2. A 2.75 (4.0 scale) cumulative grade point average or higher on courses in undergraduate work, or equivalent.
  3. International students must meet College of Graduate Studies English Proficiency requirements (6.0 IELTS or 80 on TOFEL).

Provisional

A student may be granted provisional admission based upon the recommendation of the Master of Science in Mechanical Engineering Graduate Coordinator and Department Chair

Non-Degree

Non-degree students are accepted on an individual basis as space is available.

Degree Requirements

Credit Hours
Core Requirements9
Principles of Modeling and Simulation
Research in Mechanical Engineering
Mechatronics I
Restricted Elective courses at or above the 5000G level as contracted with the faculty advisor and degree coordinator. Any appropriate course outside of those specified by name for the program or outside of the department must be approved by both the graduate program director and the department chair.15
Robotic Systems Design w/Lab
Computer Systems Design w/Lab
Control Systems with Lab
Wireless Communications
Communication Systems w/Lab
Intermediate Linear Algebra
Mathematics for Scientists and Engineers
Vehicle Dynamics
Vibration and Preventive Maintenance
Introduction to Finite Element Analysis
Mechanical System Design
Composite Materials: Manufacturing, Analysis, and Design
Renewable Energy
Wind Energy
Heating, Ventilating, and Air Conditioning
Applied Combustion
Engine Development and Performance
Biofuels Development and Testing
Automation and Computer Integrated Manufacturing Systems
Robot Dynamics, Design and Analysis
Compressible Flow
Applied Computational Fluid Dynamics
Analysis of Energy Systems
Heat Transfer Principles and Applications
Mechanical Controls
Mechatronics I
Mechatronics II
Mechanics of Deformable Solids
Fracture Mechanics
Selected Topics in Mechanical Engineering
Special Problems in Mechanical Engineering
Additive Manufacturing Studio
NanoManufacturing
Advanced Quality Control
Advanced Engineering Economy
Automated Manufacturing Systems
International Manufacturing
Manufacturing Applications in Information Technology
Additional restricted electives as approved by the graduate program coordinator and/or department chair
Capstone Activity6
Independent Study (AND)
A 6th Technical Elective
Other Non-Thesis Track Requirements: Comprehensive Exam
Comprehensive Exam
Total Credit Hours30

Other Program Requirements (Non-Thesis Track)


  1. Each candidate in the Non-Thesis Track of MSME Program must have accomplished the following by the end of their second academic semester to maintain program eligibility:
    • Identify a project adviser (project chair) and form a Project Committee.
    • Determine project topic, and present project proposal to their Project Committee.
  2. Each candidate must receive approval from the Graduate Director or Department Chair of the Mechanical Engineering to take courses that are not named specifically as degree electives. 
  3. Each candidate must complete their project on a subject approved by his/her committee.
    • The comprehensive exam of the research project must be announced to public one week prior to the defense. The comprehensive exam must be presented at a public exit seminar.
    • The comprehensive exam must be defended before the committee.
    • The comprehensive examination may include questions on the project, and subject matter related to the research project, and related course work.
    • In addition to the comprehensive exam, the student must provide the adviser with all data that was collected, including: electronic files, and a written document detailing the contents of the data.
    • The degree is conferred at the end of the semester, after the student has passed the comprehensive exam and the final written version of the project report has been approved by the committee and accepted by the graduate college.

Accelerated Bachelor's to Master's (ABM) Degree 

This Accelerated Bachelor's to Master’s Degree Program is intended for current undergraduate students in the Department of Mechanical Engineering at the Georgia Southern University. It will produce a pathway to earn both a Bachelor’s and a Master’s Degree within five years.

In accordance with SACSCOC requirements, 120 unique credit hours are required in a Bachelors degree program, and at least 30 unique credit hours are required for a Masters degree program. The MSME-ABM program combines 130 hours from the BSME program and 30 hours from the MSME program, exceeding the required 150 unique hours between undergraduate and graduate degree programs by 10 hours. The Jack N. Averitt College of Graduate Studies Handbook for Program Directors and Graduate Advisors permits a maximum of 9 shared credit hours between the undergraduate and graduate degree programs. Therefore, MSME-ABM students may share a maximum of 9 credit hours of graduate level courses (5000G) in satisfying the requirements of both degree programs.

Admission Requirements


Regular


For regular admission to the Accelerated Bachelor's to Master's Degree of Science in Mechanical Engineering (ABM-MSME) degree program, the applicant must:

  1. Be enrolled in the undergraduate mechanical engineering program (B.S.M.E) in the Department of Mechanical Engineering at the Georgia Southern University.
  2. Have completed no less than 25 and no more than 50 credits of ENGR and MENG courses, or permission of Department Chair.
  3. Must have 3.0 or better Georgia Southern Institutional GPA.

ABM programs do not allow provisional admission. ABM programs are designed for students who have demonstrated a high level of undergraduate academic performance that validates their ability to be successful graduate students. Students who do not meet the minimum requirements for regular admission may be granted admission to the program upon approval of an admissions committee consisting of at least the Department Chair and the Graduate Program director.

Degree Requirements:  30 Credit Hours (Non-Thesis)


  1. Student in the ABM program will be allowed to use up to 9 credits MENG 5000G level courses offered within the Mechanical Engineering program in meeting the requirements of both a bachelor’s degree and a master’s degree.
  2. The 9 credit hours that will be applied to both the bachelor’s and master’s degrees include: MENG 5811G, MENG 5822G, and two MENG 5000G level courses approved by each student's research advisor and the the Mechanical Engineering Department's graduate program coordinator. 
  3. Maintain a cumulative graduate GPA of 3.0 (grade of “B” or better) in their graduate degree course work (including the 9 credits of graduate course work shared with the undergraduate degree).
  4. Meet all requirements for both B.S.M.E. and M.S.M.E. degrees.
  5. A minimum of 50% of courses for the Master of Science in Mechanical Engineering degree must be taken at or above the 6000 level.

Non-Thesis Track, 30 Credit Hours

Credit Hours
Core Requirements
MENG   7137Principles of Modeling and Simulation3
MENG   7530Research in Mechanical Engineering3
TMAE   7136Mechatronics I 3
Restricted Elective courses at or above the 5000G level as contracted with the faculty advisor and degree coordinator. Any appropriate course outside of the department approved by both the graduate program director and the department chair. 15
Robotic Systems Design w/Lab
Computer Systems Design w/Lab
Control Systems with Lab
Wireless Communications
Communication Systems w/Lab
Intermediate Linear Algebra
Mathematics for Scientists and Engineers
Vehicle Dynamics
Vibration and Preventive Maintenance
Introduction to Finite Element Analysis
Mechanical System Design
Composite Materials: Manufacturing, Analysis, and Design
Renewable Energy
Wind Energy
Heating, Ventilating, and Air Conditioning
Applied Combustion
Engine Development and Performance
Biofuels Development and Testing
Automation and Computer Integrated Manufacturing Systems
Robot Dynamics, Design and Analysis
Compressible Flow
Applied Computational Fluid Dynamics
Analysis of Energy Systems
Heat Transfer Principles and Applications
Mechanical Controls
Introduction to Mechanical Engineering Research and Projects
Research Project in Mechanical Engineering
Mechatronics I
Mechatronics II
Mechanics of Deformable Solids
Fracture Mechanics
Selected Topics in Mechanical Engineering
Special Problems in Mechanical Engineering
Additive Manufacturing Studio
NanoManufacturing
Advanced Quality Control
Advanced Engineering Economy
Automated Manufacturing Systems
International Manufacturing
Manufacturing Applications in Information Technology
Additional electives as approved by the department graduate program coordinator and/or department chair
Capstone Activity
MENG   7895Independent Study (AND)3
A 6th Technical Elective 3
Other Non-Thesis Track Requirements: Comprehensive Exam
Comprehensive Exam
Total Credit Hours30

Other Program Requirements (Non-Thesis Track)


  1. Each candidate in the Non-Thesis Track of MSME Program must have accomplished the following:
    • Identified an adviser and formed a Project Committee by completion of MENG 5811G.
    • Determine topic of research project, and present research proposal to their Project Committee by completion of MENG 5822G.
  2. Each candidate must receive approval from the Graduate Director or Department Chair of the Mechanical Engineering to take courses that are not named specifically as degree electives. 
  3. Each candidate must complete their project on a subject approved by his/her committee.
    • The comprehensive exam of the research project must be announced to public one week prior to the defense. The comprehensive exam must be presented at a public exit seminar.
    • The comprehensive exam must be defended before the committee.
    • The comprehensive examination may include questions on the project, and subject matter related to the research project, and course work.
    • In addition to the comprehensive exam, the student must provide the adviser with all forms of the data that were collected, including: electronic files, and a written document detailing the contents of the data.
    • The degree is conferred at the end of the semester, after the student has passed the comprehensive exam and the final written version of the project report has been approved by the committee and accepted by the graduate college.

Advisement

Allen E. Paulson College of Engineering and Computing
Dr. Shaowen Xu
P.O. Box 8045
Statesboro, GA 30460
912-478-5006
shaowen@georgiasouthern.edu